scala.collection.mutable.Set

trait Set[A] extends Iterable[A] with collection.Set[A] with GenericSetTemplate[A, Set] with SetLike[A, Set[A]]

A generic trait for mutable sets.

To implement a concrete mutable set, you need to provide implementations of the following methods:

def contains(elem: A): Boolean
def iterator: Iterator[A]
def += (elem: A): this.type
def -= (elem: A): this.type

If you wish that methods like take , drop , filter return the same kind of set, you should also override:

def empty: This

It is also good idea to override methods foreach and size for efficiency.

• Source
  • Set.scala - Blame
  • Set.scala - History
• Since
  • 1.0

Type Members

type Self = Set[A]

The type implementing this traversable

• Attributes
  • protected[this]
• Definition Classes
  • TraversableLike

class WithFilter extends FilterMonadic[A, Repr]

A class supporting filtered operations. Instances of this class are returned by method withFilter .

• Definition Classes
  • TraversableLike

Concrete Value Members From scala.Function1

def andThen[A](g: (Boolean) ⇒ A): (A) ⇒ A

Composes two instances of Function1 in a new Function1, with this function applied first.

• A
  • the result type of function g
• g
  • a function R => A
• returns
  • a new function f such that f(x) == g(apply(x))
• Definition Classes
  • Function1
• Annotations
  • @ unspecialized ()

(defined at scala.Function1)

def compose[A](g: (A) ⇒ A): (A) ⇒ Boolean

Composes two instances of Function1 in a new Function1, with this function applied last.

• A
  • the type to which function g can be applied
• g
  • a function A => T1
• returns
  • a new function f such that f(x) == apply(g(x))
• Definition Classes
  • Function1
• Annotations
  • @ unspecialized ()

(defined at scala.Function1)

Concrete Value Members From scala.collection.GenSetLike

abstract def iterator: Iterator[A]

• Definition Classes
  • GenSetLike → GenIterableLike

(defined at scala.collection.GenSetLike)

def &(that: GenSet[A]): Set[A]

Computes the intersection between this set and another set.

Note: Same as intersect .

• that
  • the set to intersect with.
• returns
  • a new set consisting of all elements that are both in this set and in the given set that .
• Definition Classes
  • GenSetLike

(defined at scala.collection.GenSetLike)

def &~(that: GenSet[A]): Set[A]

The difference of this set and another set.

Note: Same as diff .

• that
  • the set of elements to exclude.
• returns
  • a set containing those elements of this set that are not also contained in the given set that .
• Definition Classes
  • GenSetLike

(defined at scala.collection.GenSetLike)

def apply(elem: A): Boolean

Tests if some element is contained in this set.

This method is equivalent to contains . It allows sets to be interpreted as predicates.

• elem
  • the element to test for membership.
• returns
  • true if elem is contained in this set, false otherwise.
• Definition Classes
  • GenSetLike → Function1

(defined at scala.collection.GenSetLike)

def equals(that: Any): Boolean

Compares this set with another object for equality.

Note: This operation contains an unchecked cast: if that is a set, it will assume with an unchecked cast that it has the same element type as this set. Any subsequent ClassCastException is treated as a false result.

• that
  • the other object
• returns
  • true if that is a set which contains the same elements as this set.
• Definition Classes
  • GenSetLike → Equals → AnyRef → Any

(defined at scala.collection.GenSetLike)

def intersect(that: GenSet[A]): Set[A]

Computes the intersection between this set and another set.

• that
  • the set to intersect with.
• returns
  • a new set consisting of all elements that are both in this set and in the given set that .
• Definition Classes
  • GenSetLike

(defined at scala.collection.GenSetLike)

def subsetOf(that: GenSet[A]): Boolean

Tests whether this set is a subset of another set.

• that
  • the set to test.
• returns
  • true if this set is a subset of that , i.e. if every element of this set is also an element of that .
• Definition Classes
  • GenSetLike

(defined at scala.collection.GenSetLike)

def |(that: GenSet[A]): Set[A]

Computes the union between this set and another set.

Note: Same as union .

• that
  • the set to form the union with.
• returns
  • a new set consisting of all elements that are in this set or in the given set that .
• Definition Classes
  • GenSetLike

(defined at scala.collection.GenSetLike)

Concrete Value Members From scala.collection.IterableLike

def canEqual(that: Any): Boolean

Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.

• that
  • The object with which this iterable collection should be compared
• returns
  • true , if this iterable collection can possibly equal that , false otherwise. The test takes into consideration only the run-time types of objects but ignores their elements.
• Definition Classes
  • IterableLike → Equals

(defined at scala.collection.IterableLike)

def copyToArray[B >: A](xs: Array[B], start: Int, len: Int): Unit

[use case]

Copies the elements of this mutable set to an array. Fills the given array xs with at most len elements of this mutable set, starting at position start . Copying will stop once either the end of the current mutable set is reached, or the end of the target array is reached, or len elements have been copied.

• xs
  • the array to fill.
• start
  • the starting index.
• len
  • the maximal number of elements to copy.
• Definition Classes
  • IterableLike → TraversableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def drop(n: Int): Set[A]

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• n
  • the number of elements to drop from this iterable collection.
• returns
  • a iterable collection consisting of all elements of this iterable collection except the first n ones, or else the empty iterable collection, if this iterable collection has less than n elements.
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableLike

(defined at scala.collection.IterableLike)

def dropRight(n: Int): Set[A]

Selects all elements except last n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• n
  • The number of elements to take
• returns
  • a iterable collection consisting of all elements of this iterable collection except the last n ones, or else the empty iterable collection, if this iterable collection has less than n elements.
• Definition Classes
  • IterableLike

(defined at scala.collection.IterableLike)

def exists(p: (A) ⇒ Boolean): Boolean

Tests whether a predicate holds for at least one element of this iterable collection.

Note: may not terminate for infinite-sized collections.

• p
  • the predicate used to test elements.
• returns
  • false if this iterable collection is empty, otherwise true if the given predicate p holds for some of the elements of this iterable collection, otherwise false
• Definition Classes
  • IterableLike → TraversableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def find(p: (A) ⇒ Boolean): Option[A]

Finds the first element of the iterable collection satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• p
  • the predicate used to test elements.
• returns
  • an option value containing the first element in the iterable collection that satisfies p , or None if none exists.
• Definition Classes
  • IterableLike → TraversableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def foldRight[B](z: B)(op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this iterable collection and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• z
  • the start value.
• op
  • the binary operator.
• returns
  • the result of inserting op between consecutive elements of this iterable collection, going right to left with the start value z on the right:

    op(x_1, op(x_2, ... op(x_n, z)...))
    

where `x1, ..., xn` are the elements of this iterable collection. Returns
 `z` if this iterable collection is empty.

• Definition Classes
  • IterableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def forall(p: (A) ⇒ Boolean): Boolean

Tests whether a predicate holds for all elements of this iterable collection.

Note: may not terminate for infinite-sized collections.

• p
  • the predicate used to test elements.
• returns
  • true if this iterable collection is empty or the given predicate p holds for all elements of this iterable collection, otherwise false .
• Definition Classes
  • IterableLike → TraversableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def foreach[U](f: (A) ⇒ U): Unit

[use case]

Applies a function f to all elements of this mutable set.

Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.

• f
  • the function that is applied for its side-effect to every element. The result of function f is discarded.
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableLike → TraversableOnce → GenTraversableOnce → FilterMonadic

(defined at scala.collection.IterableLike)

def grouped(size: Int): Iterator[Set[A]]

Partitions elements in fixed size iterable collections.

• size
  • the number of elements per group
• returns
  • An iterator producing iterable collections of size size , except the last will be less than size size if the elements don’t divide evenly.
• Definition Classes
  • IterableLike
• See also
  • scala.collection.Iterator, method grouped

(defined at scala.collection.IterableLike)

def reduceRight[B >: A](op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this iterable collection, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• op
  • the binary operator.
• returns
  • the result of inserting op between consecutive elements of this iterable collection, going right to left:

    op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))
    

where `x1, ..., xn` are the elements of this iterable collection.

• Definition Classes
  • IterableLike → TraversableOnce → GenTraversableOnce
• Exceptions thrown
  • UnsupportedOperationException if this iterable collection is empty.

(defined at scala.collection.IterableLike)

def sameElements[B >: A](that: GenIterable[B]): Boolean

[use case]

Checks if the other iterable collection contains the same elements in the same order as this mutable set.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• that
  • the collection to compare with.
• returns
  • true , if both collections contain the same elements in the same order, false otherwise.
• Definition Classes
  • IterableLike → GenIterableLike

(defined at scala.collection.IterableLike)

def slice(from: Int, until: Int): Set[A]

Selects an interval of elements. The returned collection is made up of all elements x which satisfy the invariant:

from <= indexOf(x) < until

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • a iterable collection containing the elements greater than or equal to index from extending up to (but not including) index until of this iterable collection.
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableLike

(defined at scala.collection.IterableLike)

def sliding(size: Int): Iterator[Set[A]]

Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.) “Sliding window” step is 1 by default.

• size
  • the number of elements per group
• returns
  • An iterator producing iterable collections of size size , except the last and the only element will be truncated if there are fewer elements than size.
• Definition Classes
  • IterableLike
• See also
  • scala.collection.Iterator, method sliding

(defined at scala.collection.IterableLike)

def sliding(size: Int, step: Int): Iterator[Set[A]]

Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.)

• size
  • the number of elements per group
• step
  • the distance between the first elements of successive groups
• returns
  • An iterator producing iterable collections of size size , except the last and the only element will be truncated if there are fewer elements than size.
• Definition Classes
  • IterableLike
• See also
  • scala.collection.Iterator, method sliding

(defined at scala.collection.IterableLike)

def take(n: Int): Set[A]

Selects first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• n
  • the number of elements to take from this iterable collection.
• returns
  • a iterable collection consisting only of the first n elements of this iterable collection, or else the whole iterable collection, if it has less than n elements.
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableLike

(defined at scala.collection.IterableLike)

def takeRight(n: Int): Set[A]

Selects last n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• n
  • the number of elements to take
• returns
  • a iterable collection consisting only of the last n elements of this iterable collection, or else the whole iterable collection, if it has less than n elements.
• Definition Classes
  • IterableLike

(defined at scala.collection.IterableLike)

def takeWhile(p: (A) ⇒ Boolean): Set[A]

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • the longest prefix of this iterable collection whose elements all satisfy the predicate p .
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableLike

(defined at scala.collection.IterableLike)

def thisCollection: collection.Iterable[A]

The underlying collection seen as an instance of Iterable . By default this is implemented as the current collection object itself, but this can be overridden.

• Attributes
  • protected[this]
• Definition Classes
  • IterableLike → TraversableLike

(defined at scala.collection.IterableLike)

def toCollection(repr: Set[A]): collection.Iterable[A]

A conversion from collections of type Repr to Iterable objects. By default this is implemented as just a cast, but this can be overridden.

• Attributes
  • protected[this]
• Definition Classes
  • IterableLike → TraversableLike

(defined at scala.collection.IterableLike)

def toIterable: collection.Iterable[A]

Returns this iterable collection as an iterable collection.

A new collection will not be built; lazy collections will stay lazy.

Note: will not terminate for infinite-sized collections.

• returns
  • an Iterable containing all elements of this iterable collection.
• Definition Classes
  • IterableLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.IterableLike)

def toStream: immutable.Stream[A]

Converts this iterable collection to a stream.

• returns
  • a stream containing all elements of this iterable collection.
• Definition Classes
  • IterableLike → TraversableLike → GenTraversableOnce

(defined at scala.collection.IterableLike)

def view(from: Int, until: Int): IterableView[A, Set[A]]

Creates a non-strict view of a slice of this iterable collection.

Note: the difference between view and slice is that view produces a view of the current iterable collection, whereas slice produces a new iterable collection.

Note: view(from, to) is equivalent to view.slice(from, to)

Note: might return different results for different runs, unless the underlying collection type is ordered.

• from
  • the index of the first element of the view
• until
  • the index of the element following the view
• returns
  • a non-strict view of a slice of this iterable collection, starting at index from and extending up to (but not including) index until .
• Definition Classes
  • IterableLike → TraversableLike

(defined at scala.collection.IterableLike)

def view: IterableView[A, Set[A]]

Creates a non-strict view of this iterable collection.

• returns
  • a non-strict view of this iterable collection.
• Definition Classes
  • IterableLike → TraversableLike

(defined at scala.collection.IterableLike)

def zipAll[B, A1 >: A, That](that: GenIterable[B], thisElem: A1, thatElem: B)(implicit bf: CanBuildFrom[Set[A], (A1, B), That]): That

[use case]

Returns a mutable set formed from this mutable set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• B
  • the type of the second half of the returned pairs
• that
  • The iterable providing the second half of each result pair
• thisElem
  • the element to be used to fill up the result if this mutable set is shorter than that .
• thatElem
  • the element to be used to fill up the result if that is shorter than this mutable set.
• returns
  • a new mutable set containing pairs consisting of corresponding elements of this mutable set and that . The length of the returned collection is the maximum of the lengths of this mutable set and that . If this mutable set is shorter than that , thisElem values are used to pad the result. If that is shorter than this mutable set, thatElem values are used to pad the result.
• Definition Classes
  • IterableLike → GenIterableLike

(defined at scala.collection.IterableLike)

def zipWithIndex[A1 >: A, That](implicit bf: CanBuildFrom[Set[A], (A1, Int), That]): That

[use case]

Zips this mutable set with its indices.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • A new mutable set containing pairs consisting of all elements of this mutable set paired with their index. Indices start at 0 .
• Definition Classes
  • IterableLike → GenIterableLike

Example:

List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))

(defined at scala.collection.IterableLike)

def zip[A1 >: A, B, That](that: GenIterable[B])(implicit bf: CanBuildFrom[Set[A], (A1, B), That]): That

[use case]

Returns a mutable set formed from this mutable set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• B
  • the type of the second half of the returned pairs
• that
  • The iterable providing the second half of each result pair
• returns
  • a new mutable set containing pairs consisting of corresponding elements of this mutable set and that . The length of the returned collection is the minimum of the lengths of this mutable set and that .
• Definition Classes
  • IterableLike → GenIterableLike

(defined at scala.collection.IterableLike)

Concrete Value Members From scala.collection.Parallelizable

def par: ParSet[A]

Returns a parallel implementation of this collection.

For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, par takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.

Specific collections (e.g. ParArray or mutable.ParHashMap ) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, par takes constant or sublinear time.

All parallel collections return a reference to themselves.

• returns
  • a parallel implementation of this collection
• Definition Classes
  • Parallelizable

(defined at scala.collection.Parallelizable)

Abstract Value Members From scala.collection.SetLike

abstract def contains(elem: A): Boolean

Tests if some element is contained in this set.

• elem
  • the element to test for membership.
• returns
  • true if elem is contained in this set, false otherwise.
• Definition Classes
  • SetLike → GenSetLike

(defined at scala.collection.SetLike)

Concrete Value Members From scala.collection.SetLike

def diff(that: GenSet[A]): Set[A]

Computes the difference of this set and another set.

• that
  • the set of elements to exclude.
• returns
  • a set containing those elements of this set that are not also contained in the given set that .
• Definition Classes
  • SetLike → GenSetLike

(defined at scala.collection.SetLike)

def map[B, That](f: (A) ⇒ B)(implicit bf: CanBuildFrom[Set[A], B, That]): That

[use case]

Builds a new collection by applying a function to all elements of this mutable set.

• B
  • the element type of the returned collection.
• f
  • the function to apply to each element.
• returns
  • a new mutable set resulting from applying the given function f to each element of this mutable set and collecting the results.
• Definition Classes
  • SetLike → TraversableLike → GenTraversableLike → FilterMonadic

(defined at scala.collection.SetLike)

def subsets(): Iterator[Set[A]]

An iterator over all subsets of this set.

• returns
  • the iterator.
• Definition Classes
  • SetLike

(defined at scala.collection.SetLike)

def subsets(len: Int): Iterator[Set[A]]

An iterator over all subsets of this set of the given size. If the requested size is impossible, an empty iterator is returned.

• len
  • the size of the subsets.
• returns
  • the iterator.
• Definition Classes
  • SetLike

(defined at scala.collection.SetLike)

def toBuffer[A1 >: A]: Buffer[A1]

Uses the contents of this set to create a new mutable buffer.

• returns
  • a buffer containing all elements of this set.
• Definition Classes
  • SetLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.SetLike)

def union(that: GenSet[A]): Set[A]

Computes the union between of set and another set.

• that
  • the set to form the union with.
• returns
  • a new set consisting of all elements that are in this set or in the given set that .
• Definition Classes
  • SetLike → GenSetLike

(defined at scala.collection.SetLike)

Concrete Value Members From scala.collection.TraversableLike

def ++:[B >: A, That](that: collection.Traversable[B])(implicit bf: CanBuildFrom[Set[A], B, That]): That

As with ++ , returns a new collection containing the elements from the left operand followed by the elements from the right operand.

It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.

Example:

scala> val x = List(1)
x: List[Int] = List(1)

scala> val y = LinkedList(2)
y: scala.collection.mutable.LinkedList[Int] = LinkedList(2)

scala> val z = x ++: y
z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)

This overload exists because: for the implementation of ++: we should reuse that of ++ because many collections override it with more efficient versions.

Since TraversableOnce has no ++ method, we have to implement that directly, but Traversable and down can use the overload.

• B
  • the element type of the returned collection.
• That
  • the class of the returned collection. Where possible, That is the same class as the current collection class Repr , but this depends on the element type B being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
• that
  • the traversable to append.
• bf
  • an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B .
• returns
  • a new collection of type That which contains all elements of this traversable collection followed by all elements of that .
• Definition Classes
  • TraversableLike

(defined at scala.collection.TraversableLike)

def ++:[B >: A, That](that: TraversableOnce[B])(implicit bf: CanBuildFrom[Set[A], B, That]): That

[use case]

As with ++ , returns a new collection containing the elements from the left operand followed by the elements from the right operand.

It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.

Example:

scala> val x = List(1)
x: List[Int] = List(1)

scala> val y = LinkedList(2)
y: scala.collection.mutable.LinkedList[Int] = LinkedList(2)

scala> val z = x ++: y
z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)

• B
  • the element type of the returned collection.
• that
  • the traversable to append.
• returns
  • a new mutable set which contains all elements of this mutable set followed by all elements of that .
• Definition Classes
  • TraversableLike

(defined at scala.collection.TraversableLike)

def ++[B >: A, That](that: GenTraversableOnce[B])(implicit bf: CanBuildFrom[Set[A], B, That]): That

[use case]

Returns a new mutable set containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the mutable set is the most specific superclass encompassing the element types of the two operands.

Example:

scala> val a = List(1)
a: List[Int] = List(1)

scala> val b = List(2)
b: List[Int] = List(2)

scala> val c = a ++ b
c: List[Int] = List(1, 2)

scala> val d = List('a')
d: List[Char] = List(a)

scala> val e = c ++ d
e: List[AnyVal] = List(1, 2, a)

• B
  • the element type of the returned collection.
• that
  • the traversable to append.
• returns
  • a new mutable set which contains all elements of this mutable set followed by all elements of that .
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def collect[B, That](pf: PartialFunction[A, B])(implicit bf: CanBuildFrom[Set[A], B, That]): That

[use case]

Builds a new collection by applying a partial function to all elements of this mutable set on which the function is defined.

• B
  • the element type of the returned collection.
• pf
  • the partial function which filters and maps the mutable set.
• returns
  • a new mutable set resulting from applying the given partial function pf to each element on which it is defined and collecting the results. The order of the elements is preserved.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def dropWhile(p: (A) ⇒ Boolean): Set[A]

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • the longest suffix of this traversable collection whose first element does not satisfy the predicate p .
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def filter(p: (A) ⇒ Boolean): Set[A]

Selects all elements of this traversable collection which satisfy a predicate.

• p
  • the predicate used to test elements.
• returns
  • a new traversable collection consisting of all elements of this traversable collection that satisfy the given predicate p . The order of the elements is preserved.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def filterNot(p: (A) ⇒ Boolean): Set[A]

Selects all elements of this traversable collection which do not satisfy a predicate.

• p
  • the predicate used to test elements.
• returns
  • a new traversable collection consisting of all elements of this traversable collection that do not satisfy the given predicate p . The order of the elements is preserved.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def flatMap[B, That](f: (A) ⇒ GenTraversableOnce[B])(implicit bf: CanBuildFrom[Set[A], B, That]): That

[use case]

Builds a new collection by applying a function to all elements of this mutable set and using the elements of the resulting collections.

For example:

def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

The type of the resulting collection is guided by the static type of mutable set. This might cause unexpected results sometimes. For example:

// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)

• B
  • the element type of the returned collection.
• f
  • the function to apply to each element.
• returns
  • a new mutable set resulting from applying the given collection-valued function f to each element of this mutable set and concatenating the results.
• Definition Classes
  • TraversableLike → GenTraversableLike → FilterMonadic

(defined at scala.collection.TraversableLike)

def groupBy[K](f: (A) ⇒ K): immutable.Map[K, Set[A]]

Partitions this traversable collection into a map of traversable collections according to some discriminator function.

Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new traversable collection.

• K
  • the type of keys returned by the discriminator function.
• f
  • the discriminator function.
• returns
  • A map from keys to traversable collections such that the following invariant holds:

    (xs groupBy f)(k) = xs filter (x => f(x) == k)
    

That is, every key `k` is bound to a traversable collection of those
elements `x` for which `f(x)` equals `k` .

• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def init: Set[A]

Selects all elements except the last.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • a traversable collection consisting of all elements of this traversable collection except the last one.
• Definition Classes
  • TraversableLike → GenTraversableLike
• Exceptions thrown
  • UnsupportedOperationException if the traversable collection is empty.

(defined at scala.collection.TraversableLike)

def inits: Iterator[Set[A]]

Iterates over the inits of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of init .

• returns
  • an iterator over all the inits of this traversable collection
• Definition Classes
  • TraversableLike

Example:

List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)

(defined at scala.collection.TraversableLike)

def partition(p: (A) ⇒ Boolean): (Set[A], Set[A])

Partitions this traversable collection in two traversable collections according to a predicate.

• p
  • the predicate on which to partition.
• returns
  • a pair of traversable collections: the first traversable collection consists of all elements that satisfy the predicate p and the second traversable collection consists of all elements that don’t. The relative order of the elements in the resulting traversable collections is the same as in the original traversable collection.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def repr: Set[A]

The collection of type traversable collection underlying this TraversableLike object. By default this is implemented as the TraversableLike object itself, but this can be overridden.

• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def scanLeft[B, That](z: B)(op: (B, A) ⇒ B)(implicit bf: CanBuildFrom[Set[A], B, That]): That

Produces a collection containing cumulative results of applying the operator going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• B
  • the type of the elements in the resulting collection
• That
  • the actual type of the resulting collection
• z
  • the initial value
• op
  • the binary operator applied to the intermediate result and the element
• bf
  • an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B .
• returns
  • collection with intermediate results
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def scanRight[B, That](z: B)(op: (A, B) ⇒ B)(implicit bf: CanBuildFrom[Set[A], B, That]): That

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Example:

List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)

• B
  • the type of the elements in the resulting collection
• That
  • the actual type of the resulting collection
• z
  • the initial value
• op
  • the binary operator applied to the intermediate result and the element
• bf
  • an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B .
• returns
  • collection with intermediate results
• Definition Classes
  • TraversableLike → GenTraversableLike
• Annotations
  • @migration
• Migration
  • (Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.

(defined at scala.collection.TraversableLike)

def scan[B >: A, That](z: B)(op: (B, B) ⇒ B)(implicit cbf: CanBuildFrom[Set[A], B, That]): That

Computes a prefix scan of the elements of the collection.

Note: The neutral element z may be applied more than once.

• B
  • element type of the resulting collection
• That
  • type of the resulting collection
• z
  • neutral element for the operator op
• op
  • the associative operator for the scan
• cbf
  • combiner factory which provides a combiner
• returns
  • a new traversable collection containing the prefix scan of the elements in this traversable collection
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def span(p: (A) ⇒ Boolean): (Set[A], Set[A])

Splits this traversable collection into a prefix/suffix pair according to a predicate.

Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p) , provided the evaluation of the predicate p does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • a pair consisting of the longest prefix of this traversable collection whose elements all satisfy p , and the rest of this traversable collection.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def splitAt(n: Int): (Set[A], Set[A])

Splits this traversable collection into two at a given position. Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n) .

Note: might return different results for different runs, unless the underlying collection type is ordered.

• n
  • the position at which to split.
• returns
  • a pair of traversable collections consisting of the first n elements of this traversable collection, and the other elements.
• Definition Classes
  • TraversableLike → GenTraversableLike

(defined at scala.collection.TraversableLike)

def tail: Set[A]

Selects all elements except the first.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• returns
  • a traversable collection consisting of all elements of this traversable collection except the first one.
• Definition Classes
  • TraversableLike → GenTraversableLike
• Exceptions thrown
  • UnsupportedOperationException if the traversable collection is empty.

(defined at scala.collection.TraversableLike)

def tails: Iterator[Set[A]]

Iterates over the tails of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of tail .

• returns
  • an iterator over all the tails of this traversable collection
• Definition Classes
  • TraversableLike

Example:

List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)

(defined at scala.collection.TraversableLike)

def toTraversable: collection.Traversable[A]

Converts this traversable collection to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite-sized collections.

• returns
  • a Traversable containing all elements of this traversable collection.
• Definition Classes
  • TraversableLike → TraversableOnce → GenTraversableOnce
• Annotations
  • @ deprecatedOverriding (message =…, since = “2.11.0”)

(defined at scala.collection.TraversableLike)

def withFilter(p: (A) ⇒ Boolean): FilterMonadic[A, Set[A]]

Creates a non-strict filter of this traversable collection.

Note: the difference between c filter p and c withFilter p is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map , flatMap , foreach , and withFilter operations.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• p
  • the predicate used to test elements.
• returns
  • an object of class WithFilter , which supports map , flatMap , foreach , and withFilter operations. All these operations apply to those elements of this traversable collection which satisfy the predicate p .
• Definition Classes
  • TraversableLike → FilterMonadic

(defined at scala.collection.TraversableLike)

Concrete Value Members From scala.collection.TraversableOnce

def /:[B](z: B)(op: (B, A) ⇒ B): B

Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.

Note: /: is alternate syntax for foldLeft ; z /: xs is the same as xs foldLeft z .

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (5 /: a)(_+_)
b: Int = 15

scala> val c = (5 /: a)((x,y) => x + y)
c: Int = 15

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• z
  • the start value.
• op
  • the binary operator.
• returns
  • the result of inserting op between consecutive elements of this traversable or iterator, going left to right with the start value z on the left:

    op(...op(op(z, x_1), x_2), ..., x_n)
    

where `x1, ..., xn` are the elements of this traversable or iterator.

• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def :\[B](z: B)(op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.

Note: :\ is alternate syntax for foldRight ; xs :\ z is the same as xs foldRight z .

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (a :\ 5)(_+_)
b: Int = 15

scala> val c = (a :\ 5)((x,y) => x + y)
c: Int = 15

• B
  • the result type of the binary operator.
• z
  • the start value
• op
  • the binary operator
• returns
  • the result of inserting op between consecutive elements of this traversable or iterator, going right to left with the start value z on the right:

    op(x_1, op(x_2, ... op(x_n, z)...))
    

where `x1, ..., xn` are the elements of this traversable or iterator.

• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def addString(b: scala.StringBuilder): scala.StringBuilder

Appends all elements of this traversable or iterator to a string builder. The written text consists of the string representations (w.r.t. the method toString ) of all elements of this traversable or iterator without any separator string.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> val h = a.addString(b)
h: StringBuilder = 1234

• b
  • the string builder to which elements are appended.
• returns
  • the string builder b to which elements were appended.
• Definition Classes
  • TraversableOnce

(defined at scala.collection.TraversableOnce)

def addString(b: scala.StringBuilder, sep: String): scala.StringBuilder

Appends all elements of this traversable or iterator to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString ) of all elements of this traversable or iterator, separated by the string sep .

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b, ", ")
res0: StringBuilder = 1, 2, 3, 4

• b
  • the string builder to which elements are appended.
• sep
  • the separator string.
• returns
  • the string builder b to which elements were appended.
• Definition Classes
  • TraversableOnce

(defined at scala.collection.TraversableOnce)

def addString(b: scala.StringBuilder, start: String, sep: String, end: String): scala.StringBuilder

Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end . Inside, the string representations (w.r.t. the method toString ) of all elements of this traversable or iterator are separated by the string sep .

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b , "List(" , ", " , ")")
res5: StringBuilder = List(1, 2, 3, 4)

• b
  • the string builder to which elements are appended.
• start
  • the starting string.
• sep
  • the separator string.
• end
  • the ending string.
• returns
  • the string builder b to which elements were appended.
• Definition Classes
  • TraversableOnce

(defined at scala.collection.TraversableOnce)

def aggregate[B](z: ⇒ B)(seqop: (B, A) ⇒ B, combop: (B, B) ⇒ B): B

Aggregates the results of applying an operator to subsequent elements.

This is a more general form of fold and reduce . It is similar to foldLeft in that it doesn’t require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.

aggregate splits the traversable or iterator into partitions and processes each partition by sequentially applying seqop , starting with z (like foldLeft ). Those intermediate results are then combined by using combop (like fold ). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so combop may be invoked an arbitrary number of times (even 0).

As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, seqop transforms each input character to an Int and adds it to the sum (of the partition). Then, combop just needs to sum up the intermediate results of the partitions:

List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })

• B
  • the type of accumulated results
• z
  • the initial value for the accumulated result of the partition - this will typically be the neutral element for the seqop operator (e.g. Nil for list concatenation or 0 for summation) and may be evaluated more than once
• seqop
  • an operator used to accumulate results within a partition
• combop
  • an associative operator used to combine results from different partitions
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def collectFirst[B](pf: PartialFunction[A, B]): Option[B]

Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

• pf
  • the partial function
• returns
  • an option value containing pf applied to the first value for which it is defined, or None if none exists.
• Definition Classes
  • TraversableOnce

Example:

Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)

(defined at scala.collection.TraversableOnce)

def copyToArray[B >: A](xs: Array[B]): Unit

[use case]

Copies the elements of this mutable set to an array. Fills the given array xs with values of this mutable set. Copying will stop once either the end of the current mutable set is reached, or the end of the target array is reached.

• xs
  • the array to fill.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def copyToArray[B >: A](xs: Array[B], start: Int): Unit

[use case]

Copies the elements of this mutable set to an array. Fills the given array xs with values of this mutable set, beginning at index start . Copying will stop once either the end of the current mutable set is reached, or the end of the target array is reached.

• xs
  • the array to fill.
• start
  • the starting index.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def copyToBuffer[B >: A](dest: Buffer[B]): Unit

Copies all elements of this traversable or iterator to a buffer.

Note: will not terminate for infinite-sized collections.

• dest
  • The buffer to which elements are copied.
• Definition Classes
  • TraversableOnce

(defined at scala.collection.TraversableOnce)

def count(p: (A) ⇒ Boolean): Int

Counts the number of elements in the traversable or iterator which satisfy a predicate.

• p
  • the predicate used to test elements.
• returns
  • the number of elements satisfying the predicate p .
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def foldLeft[B](z: B)(op: (B, A) ⇒ B): B

Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• z
  • the start value.
• op
  • the binary operator.
• returns
  • the result of inserting op between consecutive elements of this traversable or iterator, going left to right with the start value z on the left:

    op(...op(z, x_1), x_2, ..., x_n)
    

where `x1, ..., xn` are the elements of this traversable or iterator.
Returns `z` if this traversable or iterator is empty.

• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def fold[A1 >: A](z: A1)(op: (A1, A1) ⇒ A1): A1

Folds the elements of this traversable or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite-sized collections.

• A1
  • a type parameter for the binary operator, a supertype of A .
• z
  • a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation, 0 for addition, or 1 for multiplication).
• op
  • a binary operator that must be associative.
• returns
  • the result of applying the fold operator op between all the elements and z , or z if this traversable or iterator is empty.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def maxBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

[use case]

Finds the first element which yields the largest value measured by function f.

• B
  • The result type of the function f.
• f
  • The measuring function.
• returns
  • the first element of this mutable set with the largest value measured by function f.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def minBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

[use case]

Finds the first element which yields the smallest value measured by function f.

• B
  • The result type of the function f.
• f
  • The measuring function.
• returns
  • the first element of this mutable set with the smallest value measured by function f.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def mkString(sep: String): String

Displays all elements of this traversable or iterator in a string using a separator string.

• sep
  • the separator string.
• returns
  • a string representation of this traversable or iterator. In the resulting string the string representations (w.r.t. the method toString ) of all elements of this traversable or iterator are separated by the string sep .
• Definition Classes
  • TraversableOnce → GenTraversableOnce

Example:

List(1, 2, 3).mkString("|") = "1|2|3"

(defined at scala.collection.TraversableOnce)

def mkString(start: String, sep: String, end: String): String

Displays all elements of this traversable or iterator in a string using start, end, and separator strings.

• start
  • the starting string.
• sep
  • the separator string.
• end
  • the ending string.
• returns
  • a string representation of this traversable or iterator. The resulting string begins with the string start and ends with the string end . Inside, the string representations (w.r.t. the method toString ) of all elements of this traversable or iterator are separated by the string sep .
• Definition Classes
  • TraversableOnce → GenTraversableOnce

Example:

List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"

(defined at scala.collection.TraversableOnce)

def reduceLeftOption[B >: A](op: (B, A) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• op
  • the binary operator.
• returns
  • an option value containing the result of reduceLeft(op) if this traversable or iterator is nonempty, None otherwise.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def reduceLeft[B >: A](op: (B, A) ⇒ B): B

Applies a binary operator to all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• op
  • the binary operator.
• returns
  • the result of inserting op between consecutive elements of this traversable or iterator, going left to right:

    op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n)
    

where `x1, ..., xn` are the elements of this traversable or iterator.

• Definition Classes
  • TraversableOnce
• Exceptions thrown
  • UnsupportedOperationException if this traversable or iterator is empty.

(defined at scala.collection.TraversableOnce)

def reduceOption[A1 >: A](op: (A1, A1) ⇒ A1): Option[A1]

Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

• A1
  • A type parameter for the binary operator, a supertype of A .
• op
  • A binary operator that must be associative.
• returns
  • An option value containing result of applying reduce operator op between all the elements if the collection is nonempty, and None otherwise.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def reduceRightOption[B >: A](op: (A, B) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

• B
  • the result type of the binary operator.
• op
  • the binary operator.
• returns
  • an option value containing the result of reduceRight(op) if this traversable or iterator is nonempty, None otherwise.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def reduce[A1 >: A](op: (A1, A1) ⇒ A1): A1

Reduces the elements of this traversable or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

• A1
  • A type parameter for the binary operator, a supertype of A .
• op
  • A binary operator that must be associative.
• returns
  • The result of applying reduce operator op between all the elements if the traversable or iterator is nonempty.
• Definition Classes
  • TraversableOnce → GenTraversableOnce
• Exceptions thrown
  • UnsupportedOperationException if this traversable or iterator is empty.

(defined at scala.collection.TraversableOnce)

def toIndexedSeq: immutable.IndexedSeq[A]

Converts this traversable or iterator to an indexed sequence.

Note: will not terminate for infinite-sized collections.

• returns
  • an indexed sequence containing all elements of this traversable or iterator.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def toMap[T, U](implicit ev: <:<[A, (T, U)]): immutable.Map[T, U]

[use case]

Converts this mutable set to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

• returns
  • a map of type immutable.Map[T, U] containing all key/value pairs of type (T, U) of this mutable set.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

def toSet[B >: A]: immutable.Set[B]

Converts this traversable or iterator to a set.

Note: will not terminate for infinite-sized collections.

• returns
  • a set containing all elements of this traversable or iterator.
• Definition Classes
  • TraversableOnce → GenTraversableOnce

(defined at scala.collection.TraversableOnce)

Concrete Value Members From scala.collection.generic.GenericSetTemplate

def empty: Set[A]

• Definition Classes
  • GenericSetTemplate

(defined at scala.collection.generic.GenericSetTemplate)

Concrete Value Members From scala.collection.generic.GenericTraversableTemplate ——————————————————————————–

def flatten[B](implicit asTraversable: (A) ⇒ GenTraversableOnce[B]): Set[B]

[use case]

Converts this mutable set of traversable collections into a mutable set formed by the elements of these traversable collections.

The resulting collection’s type will be guided by the static type of mutable set. For example:

val xs = List(
           Set(1, 2, 3),
           Set(1, 2, 3)
         ).flatten
// xs == List(1, 2, 3, 1, 2, 3)

val ys = Set(
           List(1, 2, 3),
           List(3, 2, 1)
         ).flatten
// ys == Set(1, 2, 3)

• B
  • the type of the elements of each traversable collection.
• returns
  • a new mutable set resulting from concatenating all element mutable sets.
• Definition Classes
  • GenericTraversableTemplate

(defined at scala.collection.generic.GenericTraversableTemplate)

def genericBuilder[B]: Builder[B, Set[B]]

The generic builder that builds instances of Traversable at arbitrary element types.

• Definition Classes
  • GenericTraversableTemplate

(defined at scala.collection.generic.GenericTraversableTemplate)

def transpose[B](implicit asTraversable: (A) ⇒ GenTraversableOnce[B]): Set[Set[B]]

Transposes this collection of traversable collections into a collection of collections.

The resulting collection’s type will be guided by the static type of collection. For example:

val xs = List(
           Set(1, 2, 3),
           Set(4, 5, 6)).transpose
// xs == List(
//         List(1, 4),
//         List(2, 5),
//         List(3, 6))

val ys = Vector(
           List(1, 2, 3),
           List(4, 5, 6)).transpose
// ys == Vector(
//         Vector(1, 4),
//         Vector(2, 5),
//         Vector(3, 6))

• B
  • the type of the elements of each traversable collection.
• asTraversable
  • an implicit conversion which asserts that the element type of this collection is a Traversable .
• returns
  • a two-dimensional collection of collections which has as n th row the n th column of this collection.
• Definition Classes
  • GenericTraversableTemplate
• Annotations
  • @migration
• Migration
  • (Changed in version 2.9.0) transpose throws an IllegalArgumentException if collections are not uniformly sized.
• Exceptions thrown
  • IllegalArgumentException if all collections in this collection are not of the same size.

(defined at scala.collection.generic.GenericTraversableTemplate)

def unzip3[A1, A2, A3](implicit asTriple: (A) ⇒ (A1, A2, A3)): (Set[A1], Set[A2], Set[A3])

Converts this collection of triples into three collections of the first, second, and third element of each triple.

val xs = Traversable(
           (1, "one", '1'),
           (2, "two", '2'),
           (3, "three", '3')).unzip3
// xs == (Traversable(1, 2, 3),
//        Traversable(one, two, three),
//        Traversable(1, 2, 3))

• A1
  • the type of the first member of the element triples
• A2
  • the type of the second member of the element triples
• A3
  • the type of the third member of the element triples
• asTriple
  • an implicit conversion which asserts that the element type of this collection is a triple.
• returns
  • a triple of collections, containing the first, second, respectively third member of each element triple of this collection.
• Definition Classes
  • GenericTraversableTemplate

(defined at scala.collection.generic.GenericTraversableTemplate)

def unzip[A1, A2](implicit asPair: (A) ⇒ (A1, A2)): (Set[A1], Set[A2])

Converts this collection of pairs into two collections of the first and second half of each pair.

val xs = Traversable(
           (1, "one"),
           (2, "two"),
           (3, "three")).unzip
// xs == (Traversable(1, 2, 3),
//        Traversable(one, two, three))

• A1
  • the type of the first half of the element pairs
• A2
  • the type of the second half of the element pairs
• asPair
  • an implicit conversion which asserts that the element type of this collection is a pair.
• returns
  • a pair of collections, containing the first, respectively second half of each element pair of this collection.
• Definition Classes
  • GenericTraversableTemplate

(defined at scala.collection.generic.GenericTraversableTemplate)

Concrete Value Members From scala.collection.generic.Growable

def ++=(xs: TraversableOnce[A]): Set.this.type

adds all elements produced by a TraversableOnce to this growable collection.

• xs
  • the TraversableOnce producing the elements to add.
• returns
  • the growable collection itself.
• Definition Classes
  • Growable

(defined at scala.collection.generic.Growable)

def +=(elem1: A, elem2: A, elems: A*): Set.this.type

adds two or more elements to this growable collection.

• elem1
  • the first element to add.
• elem2
  • the second element to add.
• elems
  • the remaining elements to add.
• returns
  • the growable collection itself
• Definition Classes
  • Growable

(defined at scala.collection.generic.Growable)

Concrete Value Members From scala.collection.generic.Shrinkable

def --=(xs: TraversableOnce[A]): Set.this.type

Removes all elements produced by an iterator from this shrinkable collection.

• xs
  • the iterator producing the elements to remove.
• returns
  • the shrinkable collection itself
• Definition Classes
  • Shrinkable

(defined at scala.collection.generic.Shrinkable)

def -=(elem1: A, elem2: A, elems: A*): Set.this.type

Removes two or more elements from this shrinkable collection.

• elem1
  • the first element to remove.
• elem2
  • the second element to remove.
• elems
  • the remaining elements to remove.
• returns
  • the shrinkable collection itself
• Definition Classes
  • Shrinkable

(defined at scala.collection.generic.Shrinkable)

Concrete Value Members From scala.collection.mutable.Builder

def mapResult[NewTo](f: (Set[A]) ⇒ NewTo): Builder[A, NewTo]

Creates a new builder by applying a transformation function to the results of this builder.

• NewTo
  • the type of collection returned by f .
• f
  • the transformation function.
• returns
  • a new builder which is the same as the current builder except that a transformation function is applied to this builder’s result.
• Definition Classes
  • Builder
• Note
  • The original builder should no longer be used after mapResult is called.

(defined at scala.collection.mutable.Builder)

def sizeHint(size: Int): Unit

Gives a hint how many elements are expected to be added when the next result is called. Some builder classes will optimize their representation based on the hint. However, builder implementations are still required to work correctly even if the hint is wrong, i.e. a different number of elements is added.

• size
  • the hint how many elements will be added.
• Definition Classes
  • Builder

(defined at scala.collection.mutable.Builder)

def sizeHint(coll: TraversableLike[_, _]): Unit

Gives a hint that one expects the result of this builder to have the same size as the given collection, plus some delta. This will provide a hint only if the collection is known to have a cheap size method. Currently this is assumed to be the case if and only if the collection is of type IndexedSeqLike . Some builder classes will optimize their representation based on the hint. However, builder implementations are still required to work correctly even if the hint is wrong, i.e. a different number of elements is added.

• coll
  • the collection which serves as a hint for the result’s size.
• Definition Classes
  • Builder

(defined at scala.collection.mutable.Builder)

def sizeHint(coll: TraversableLike[_, _], delta: Int): Unit

Gives a hint that one expects the result of this builder to have the same size as the given collection, plus some delta. This will provide a hint only if the collection is known to have a cheap size method. Currently this is assumed to be the case if and only if the collection is of type IndexedSeqLike . Some builder classes will optimize their representation based on the hint. However, builder implementations are still required to work correctly even if the hint is wrong, i.e. a different number of elements is added.

• coll
  • the collection which serves as a hint for the result’s size.
• delta
  • a correction to add to the coll.size to produce the size hint.
• Definition Classes
  • Builder

(defined at scala.collection.mutable.Builder)

def sizeHintBounded(size: Int, boundingColl: TraversableLike[_, _]): Unit

Gives a hint how many elements are expected to be added when the next result is called, together with an upper bound given by the size of some other collection. Some builder classes will optimize their representation based on the hint. However, builder implementations are still required to work correctly even if the hint is wrong, i.e. a different number of elements is added.

• size
  • the hint how many elements will be added.
• boundingColl
  • the bounding collection. If it is an IndexedSeqLike, then sizes larger than collection’s size are reduced.
• Definition Classes
  • Builder

(defined at scala.collection.mutable.Builder)

Concrete Value Members From scala.collection.mutable.Set

def companion: GenericCompanion[Set]

The factory companion object that builds instances of class mutable.Set . (or its Iterable superclass where class mutable.Set is not a Seq .)

• Definition Classes
  • Set → Set → GenSet → Iterable → Iterable → GenIterable → Traversable → Traversable → GenTraversable → GenericTraversableTemplate

(defined at scala.collection.mutable.Set)

def seq: Set[A]

A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).

This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.

• returns
  • a sequential view of the collection.
• Definition Classes
  • Set → Set → GenSet → GenSetLike → Iterable → Iterable → GenIterable → Traversable → Traversable → GenTraversable → Parallelizable → TraversableOnce → GenTraversableOnce

(defined at scala.collection.mutable.Set)

Abstract Value Members From scala.collection.mutable.SetLike

abstract def +=(elem: A): Set.this.type

Adds a single element to the set.

• elem
  • the element to be added.
• returns
  • the builder itself.
• Definition Classes
  • SetLike → Builder → Growable

(defined at scala.collection.mutable.SetLike)

abstract def -=(elem: A): Set.this.type

Removes a single element from this mutable set.

• elem
  • the element to remove.
• returns
  • the mutable set itself
• Definition Classes
  • SetLike → Shrinkable

(defined at scala.collection.mutable.SetLike)

Concrete Value Members From scala.collection.mutable.SetLike

def +(elem: A): Set[A]

Creates a new set consisting of all the elements of this set and elem .

Note that duplicates (elements for which equals yields true) will be removed, but it is not specified whether it will be an element of this set or a newly added element.

• elem
  • the element to add.
• returns
  • a new set consisting of elements of this set and elem .
• Definition Classes
  • SetLike → SetLike → GenSetLike
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) + creates a new set. Use += to add an element to this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def +(elem1: A, elem2: A, elems: A*): Set[A]

Creates a new set consisting of all the elements of this set and two or more specified elements.

Note that duplicates (elements for which equals yields true) will be removed, but it is not specified whether it will be an element of this set or a newly added element.

• elem1
  • the first element to add.
• elem2
  • the second element to add.
• elems
  • the remaining elements to add.
• returns
  • a new set consisting of all the elements of this set, elem1 , elem2 and those in elems .
• Definition Classes
  • SetLike → SetLike
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) + creates a new set. Use += to add an element to this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def ++(xs: GenTraversableOnce[A]): Set[A]

Creates a new set consisting of all the elements of this set and those provided by the specified traversable object.

Note that duplicates (elements for which equals yields true) will be removed, but it is not specified whether it will be an element of this set or a newly added element.

• xs
  • the traversable object.
• returns
  • a new set consisting of elements of this set and those in xs .
• Definition Classes
  • SetLike → SetLike
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) ++ creates a new set. Use ++= to add elements to this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def -(elem: A): Set[A]

Creates a new set consisting of all the elements of this set except elem .

• elem
  • the element to remove.
• returns
  • a new set consisting of all the elements of this set except elem .
• Definition Classes
  • SetLike → SetLike → Subtractable → GenSetLike
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) - creates a new set. Use -= to remove an element from this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def -(elem1: A, elem2: A, elems: A*): Set[A]

Creates a new set consisting of all the elements of this set except the two or more specified elements.

• elem1
  • the first element to remove.
• elem2
  • the second element to remove.
• elems
  • the remaining elements to remove.
• returns
  • a new set consisting of all the elements of this set except elem1 , elem2 and elems .
• Definition Classes
  • SetLike → Subtractable
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) - creates a new set. Use -= to remove an element from this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def --(xs: GenTraversableOnce[A]): Set[A]

Creates a new set consisting of all the elements of this set except those provided by the specified traversable object.

• xs
  • the traversable object.
• returns
  • a new set consisting of all the elements of this set except elements from xs .
• Definition Classes
  • SetLike → Subtractable
• Annotations
  • @migration
• Migration
  • (Changed in version 2.8.0) -- creates a new set. Use --= to remove elements from this set and return that set itself.

(defined at scala.collection.mutable.SetLike)

def add(elem: A): Boolean

Adds an element to this mutable set.

• elem
  • the element to be added
• returns
  • true if the element was not yet present in the set, false otherwise.
• Definition Classes
  • SetLike

(defined at scala.collection.mutable.SetLike)

def clone(): Set[A]

Create a copy of the receiver object.

The default implementation of the clone method is platform dependent.

• returns
  • a copy of the receiver object.
• Definition Classes
  • SetLike → Cloneable → AnyRef
• Note
  • not specified by SLS as a member of AnyRef

(defined at scala.collection.mutable.SetLike)

def newBuilder: Builder[A, Set[A]]

A common implementation of newBuilder for all mutable sets in terms of empty . Overrides the implementation in collection.SetLike for better efficiency.

• Attributes
  • protected[this]
• Definition Classes
  • SetLike → SetLike → TraversableLike → HasNewBuilder

(defined at scala.collection.mutable.SetLike)

def parCombiner: Combiner[A, ParSet[A]]

The default par implementation uses the combiner provided by this method to create a new parallel collection.

• returns
  • a combiner for the parallel collection of type ParRepr
• Attributes
  • protected[this]
• Definition Classes
  • SetLike → SetLike → TraversableLike → Parallelizable

(defined at scala.collection.mutable.SetLike)

def remove(elem: A): Boolean

Removes an element from this set.

• elem
  • The element to be removed.
• returns
  • true if the element was previously present in the set, false otherwise.
• Definition Classes
  • SetLike

(defined at scala.collection.mutable.SetLike)

def result(): Set[A]

The result when this set is used as a builder

• returns
  • the set representation itself.
• Definition Classes
  • SetLike → Builder

(defined at scala.collection.mutable.SetLike)

def retain(p: (A) ⇒ Boolean): Unit

Removes all elements from the set for which do not satisfy a predicate.

• p
  • the predicate used to test elements. Only elements for which p returns true are retained in the set; all others are removed.
• Definition Classes
  • SetLike

(defined at scala.collection.mutable.SetLike)

def toSeq: collection.Seq[A]

Converts this mutable set to a sequence.

Note : assumes a fast size method. Subclasses should override if this is not true.

• returns
  • a sequence containing all elements of this mutable set.
• Definition Classes
  • SetLike → SetLike → TraversableOnce → GenTraversableOnce

(defined at scala.collection.mutable.SetLike)

def update(elem: A, included: Boolean): Unit

Updates the presence of a single element in this set.

This method allows one to add or remove an element elem from this set depending on the value of parameter included . Typically, one would use the following syntax:

set(elem) = true  // adds element
set(elem) = false // removes element

• elem
  • the element to be added or removed
• included
  • a flag indicating whether element should be included or excluded.
• Definition Classes
  • SetLike

(defined at scala.collection.mutable.SetLike)

Deprecated Value Members From scala.collection.mutable.SetLike

def <<(cmd: Message[A]): Unit

Send a message to this scriptable object.

• cmd
  • the message to send.
• Definition Classes
  • SetLike → Scriptable
• Annotations
  • @ deprecated
• Deprecated
  • (Since version 2.11.0) Scripting is deprecated.
• Exceptions thrown
  • UnsupportedOperationException if the message was not understood.

(defined at scala.collection.mutable.SetLike)

Concrete Value Members From Implicit scala.collection.parallel.CollectionsHaveToParArray ——————————————————————————–

def toParArray: ParArray[T]

• Implicit information
  • This member is added by an implicit conversion from Set [A] to CollectionsHaveToParArray [Set [A], T] performed by method CollectionsHaveToParArray in scala.collection.parallel. This conversion will take place only if an implicit value of type (Set [A]) ⇒ GenTraversableOnce [T] is in scope.
• Definition Classes
  • CollectionsHaveToParArray (added by implicit convertion: scala.collection.parallel.CollectionsHaveToParArray)

Full Source:

/*                     __                                               *\
**     ________ ___   / /  ___     Scala API                            **
**    / __/ __// _ | / /  / _ |    (c) 2003-2013, LAMP/EPFL             **
**  __\ \/ /__/ __ |/ /__/ __ |    http://scala-lang.org/               **
** /____/\___/_/ |_/____/_/ | |                                         **
**                          |/                                          **
\*                                                                      */



package scala
package collection
package mutable

import generic._

/** A generic trait for mutable sets.
 *  $setNote
 *  $setTags
 *
 *  @since 1.0
 *  @author Matthias Zenger
 *  @define Coll `mutable.Set`
 *  @define coll mutable set
 */
trait Set[A] extends Iterable[A]
//                with GenSet[A]
                with scala.collection.Set[A]
                with GenericSetTemplate[A, Set]
                with SetLike[A, Set[A]] {
  override def companion: GenericCompanion[Set] = Set
  override def seq: Set[A] = this
}

/** $factoryInfo
 *  The current default implementation of a $Coll is a `HashSet`.
 *  @define coll mutable set
 *  @define Coll `mutable.Set`
 */
object Set extends MutableSetFactory[Set] {
  implicit def canBuildFrom[A]: CanBuildFrom[Coll, A, Set[A]] = setCanBuildFrom[A]
  override def empty[A]: Set[A] = HashSet.empty[A]
}

/** Explicit instantiation of the `Set` trait to reduce class file size in subclasses. */
abstract class AbstractSet[A] extends AbstractIterable[A] with Set[A]